AR91.30-P-0006FF | Removing and installing front seat backrest heated cushion | 10.8.04 |
MODEL 454.0 with CODE (S17) Heated seats (FFO)
P91.30-2196-06
Shown on foam part of right front seat
1 Foam part
2 Adhesive strips
4 Adhesive strips
R13/1 Left seat heated cushion
R13/3 Right seat heated cushion
| Remove | ||
1 | Remove foam part (1) from front seat backrest | ||
2 | Remove cover from foam part (1) of front seat backrest | The left seat heated cushion (R13/1) and the right seat heated cushion (R13/3) cannot be removed from the foam part (1). Both parts must always be replaced. | |
| |||
| Install | ||
3 | Align left seat heated cushion (R13/1) or right seat heated cushion (R13/3) on foam part (1), so that the openings (arrows C) on the left seat heated cushion (R13/1) or the right seat heated cushion (R13/3) are in exact alignment with the openings (arrows A) in the foam part (1) | ||
4 | Pull off adhesive strip (2) and stick left seat heated cushion (R13/1) or right seat heated cushion (R13/3) to foam part (1) | Ensure that the openings (arrows C) on the left seat heated cushion (R13/1) or the right seat heated cushion (R13/3) are in exact alignment with the openings (arrows A) in the foam part (1). | |
5 | Push areas (D) of left seat heated cushion (R13/1) or right seat heated cushion (R13/3) into recesses (arrows B) in foam part (1) | If the areas (D) of the left seat heated cushion (R13/1) or the right seat heated cushion (R13/3) do not sit properly in the recesses (arrows B), this may prevent the seat backrest cover from being installed properly. | |
6 | Pull off adhesive strip (4) and stick left seat heated cushion (R13/1) or right seat heated cushion (R13/3) to foam part (1) | ||
7 | Fit cover to foam part (1) | ||
| |||
8 | Fit foam part (1) with cover to front seat backrest |
Pliers
454 589 02 37 00
Referenced documents
- ar9110p1120ff Removing and installing front seat backrest foam part
- ar9118p182003ff Removing/installing cover on foam part