ar9118p182003ff

Removing/installing cover on foam part

Type ar · topic 91.18 · version 0101 · 2004-10-14

Applies to: MODEL 454.0 Vordersitzlehne

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.18 Seat covers — Series 454 (models 0**)

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.42 Seat backrest/head restraint — Series 454 (models 0**)

EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.42 Seat backrest/head restraint — Series 454 (models 0**)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.42 Seat backrest/head restraint — Series 454 (models 0**)

AR91.18-P-1820-03FF

Removing/installing cover on foam part

Removing/installing cover on foam part

Pliers

454 589 02 37 00

Removing/installing cover on foam part

P91.18-2167-01

Detaching

1 Fold back the cover (1) until the clips on the foam part (2) are accessible.

2 Loosen the cover (1) from the clips on the foam part (2).

Do not damage clips of foam part (2), since this will make foam part (2) unusable.

3 Remove the cover (1).

Removing/installing cover on foam part

P91.18-2166-06

Attaching

4 Align the cover (1) on the foam
part (2).

5 Fit cover (1) in the specified order
(a to k) (Fig. A) to the clips on the foam part (2).

The carrier on the cover (1) must latch into the clips on the foam
part (2).

6 Take hold of both top corners of the foam part (2) and pull the cover (1) over evenly.

Ensure that the cover (1) is correctly positioned on the foam
part (2).