P91.29-2375-07
Exemplified on removed front seat with memory package (driver seat, steering column, mirrors), code 275
1 Covers
2 Circlip
3 Input shaft
M27/5 Backrest angle adjustment motor, driver
M28/5 Backrest angle adjustment motor, front passenger
4 Motor
5 Electrical connector
6 Bolt
| Remove/Install | ||
Danger! | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | |
1 | Remove front seat | ||
2 | Remove covering on front seat backrest | ||
3 | Remove covers (1) | ||
4 | Remove circlip (2) | ||
5 | Slide drive shaft (3) through motor (4) | ||
6 | Disconnect electrical connector (5) from driver backrest angle adjustment motor (M27/5) or front passenger backrest angle adjustment motor (M28/5) | ||
7 | Unscrew bolt (6) | ||
8 | Install in the reverse order |
Referenced documents
- ar9110p1000rt Remove/install front seat
- ar9118p1820rt Remove front seat backrest cover
- as9100z000101a Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.