R13/1x1 | Front seat heated cushion connector |
Pfeil | Rivet, seat cushion frame bracket to seat frame base |
P91.29-2135-10
1 | Screw at seat backrest cover |
2 | Seat backrest cover |
P91.27-2018-11
3 | Screw |
6 | Plastic grommet |
M25m5 | Left front seat (seat backrest) adjustment electric motor |
M26m5 | Right front seat (seat backrest) adjustment electric motor |
P91.29-2129-02
P91.10-2160-02
| Remove/install | ||
1 | Drill out rivet connecting seat cushion frame bracket to seat frame base (arrow) | To drill out the rivet, move front seat back to end stop. | |
Danger | Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | |
2 | Disconnect ground line from battery |
| |
Topical note | Notes on battery | ||
Model 463.241 | |||
3 | Remove drive for seat height adjustment |
| |
4 | Remove seat adjustment switch unit from front seat |
| |
5 | Remove switch for multicontour seat |
| |
6 | Remove the seat cushion | Disconnect front seat heater pad electrical connector (R13/1x1 left, R13/3x1 right). Pull electric line of seat occupancy recognition from rubber grommet. | |
7 | Remove screws from seat backrest cover (1) and remove cover (2). | ||
8 | Remove screws (3) at front seat (seat backrest) adjustment electric motor at left and right (M25m5, M26m5) | Push in padding of seat backrest; remove screws. | |
9 | Remove front seat (seat backrest) adjustment electric motor at left and right (M25m5, M26m5) and remove electric line from plug housing | Mark before removing to prevent mixing them up. | |
10 | Remove plastic grommet (6) | ||
11 | Remove front seat (seat backrest) adjustment electric motor at left and right (M25m5, M26m5) with electric line | Disconnect cable tie and pull electric line out of backrest. | |
12 | Install in the reverse order | ||
13 | Check function of multicontour seat | See owner's manual. |
Referenced documents
- ah5410p000101a
- ah5410p000101a Notes on battery
- ar5410p0003g Disconnect/connect battery ground line
- ar5410p0003pv
- ar5410p0003pv Disconnect/connect battery ground line
- ar9125p1720g Remove/install multicontour seat switch
- ar9129p0003g Remove/install seat adjustment switch unit on front seat
- ar9129p1421g Removing and installing seat height adjustment drive
- as5410z000101a Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of