Remove/install bench seat adjustment Bowden cable · ar9121d4060ecb · Mercedes-Benz WIS

AR91.21-D-4060ECB

Remove/install bench seat adjustment Bowden cable

2.11.11

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper
Left Bowden cable

D91.12-1118-06

1 Nut

2 Bowden cable

3 Nut

4 Screw

5 Blind rivet

6 Nail clamp

	Removing
 Danger!	Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof	Keep body parts and limbs well clear of moving parts.	AS00.00-Z-0011-01A
1	Remove bench seat adjustment lever		AR91.21-D-4050EC
2	Slacken nut (1)	 When replacing the Bowden cable (2), transfer setting from the old Bowden cable (2) to the new.
3	Unscrew nut (3) from screw/bolt (4)
4	Remove screw (4)
5	Drill blind rivet (5)	Drill gotis://K_58.1_04.0
		Wet/dry vacuum cleaner gotis://P_00.12_06.0
6	Remove nail clamp (6)
7	Remove Bowden cable (2)
	Install
8	Install Bowden cable (2)
9	Fit bolt (4)
10	Tighten nut (3) on bolt (4)
11	Tighten nut (1)
12	Install nail clamp (6)
13	Rivet in blind rivet (5)
	General information on riveting		AH60.00-P-0003-01N
		Blind rivet/punch riveting method gotis://K_68-80_06.0
		Hand riveter
		Rivet	*BR00.45-Z-1013-13A
14	Install bench seat adjustment lever		AR91.21-D-4050EC
15	Perform function test	 Adjust Bowden cable (2) if necessary.

Repair materials

Number	Designation	Order number
BR00.45-Z-1013-13A	Rivet replaced by: N 910002 003108	A 002 990 80 97

ah6000p000301n General information on riveting
ar9121d4050ec Remove/install bench seat adjustment lever
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.