ar9121d4050ec

Remove/install bench seat adjustment lever

Type ar · topic 91.21 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.21 Passenger seats — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.46 Seat adjustment — Series 903 (models 6**)

AR91.21-D-4050EC

Remove/install bench seat adjustment lever

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Remove/install bench seat adjustment lever

D91.12-1115-06

1 Bolt

2 Washers

3 Sleeve

4 Bowden cables

5 Adjustment lever

6 Protective cap

	Remove/install
 Danger!	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	When moving components, ensure that no body parts or limbs are within the operating range of moving parts.	AS00.00-Z-0011-01A
1	Remove front paneling from bench seat housing		AR91.21-D-5745EC
2	Remove screw (1)
3	Take off washers (2) and sleeve (3) at the same time
4	Detach Bowden cables (4) on adjustment lever (5)
5	Remove adjustment lever (5)
6	Detach protective cap (6)
7	Install in the reverse order

Referenced documents

ar9121d5745ec Remove/install front trim panel on bench seat housing
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.