ar9121d4060eca

Remove/install bench seat adjustment Bowden cable

Type ar · topic 91.21 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper Right Bowden cable

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.21 Passenger seats — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.46 Seat adjustment — Series 903 (models 6**)

AR91.21-D-4060ECA

Remove/install bench seat adjustment Bowden cable

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper
Right Bowden cable

Remove/install bench seat adjustment Bowden cable

D91.12-1121-06

1 Nut

2 Bowden cable

3 Nut

4 Bolt

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Remove bench seat adjustment lever

AR91.21-D-4050EC

2

Slacken nut (1)

When replacing the Bowden cable (2), transfer setting from the old Bowden cable (2) to the new.

3

Unscrew nut (3) from bolt (4)

4

Remove bolt (4)

5

Unhook Bowden cable (2)

6

Remove Bowden cable (2)

7

Install in the reverse order

8

Perform a function test

Adjust Bowden cable (2) if necessary.

Referenced documents