Remove/install bench seat sliding block · ar9121d4040b · Mercedes-Benz WIS

AR91.21-D-4040B

Remove/install bench seat sliding block

6.5.04

MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
Rear sliding block

D91.12-1112-09

1 Bolt

2 Sliding block bracket

5 Nuts

3 Bench seat

4 Sliding block

 	Remove/install
 Danger!	Risk of injury caused by body parts becoming jammed, pinched or severed by doors, covers, flaps or by loose components	Keep body parts well clear when moving doors, covers, flaps and components. Wear protective gloves and protective shoes.	AS00.00-Z-0025-01A
1	Remove right side paneling at bench seat housing		AR91.21-D-5746A
2	Remove bolt (1) at sliding block bracket (2)	 Installation: Do not tighten bolt (1) until adjustments are being carried out.
3	Tilt bench seat (3) back
4	Remove sliding block (4) together with sliding block bracket (2)
5	Unscrew nuts (5).	 Installation: Do not tighten nuts (5) until adjustments are being carried out.
6	Remove sliding block (4) from sliding block bracket (2)
7	Install in the reverse order
8	Adjust sliding block (4)		AR91.21-D-4040-01B
		Bolt, rear sliding block bracket to seat bench	*BA91.12-N-1006-03A
		Nut, sliding block to bench seat	*BA91.12-N-1007-03A

 Rear seats

Number	Designation		Model 903.662 with code ZU8, Z29


BA91.12-N-1006-03A	Bolt, rear sliding block bracket to seat bench	Nm	39
BA91.12-N-1007-03A	Nut, sliding block to bench seat	Nm	20

ar9121d404001b Adjust rear sliding block at bench seat
ar9121d5746a Remove/install panel at right side on bench seat housing
as0000z002501a Risk of injury caused by body parts becoming jammed, pinched or severed by doors, covers, flaps or by loose components