ar9121d5746a

Remove/install panel at right side on bench seat housing

Type ar · topic 91.21 · version 0101 · 2004-12-16

Applies to: MODEL 903.662 with CODE (ZU8) National version for USA with CODE (Z29) "James Cook" touring camper, NAFTA

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.21 Passenger seats — Series 903 (models 662)

EinPAS 37 Interior equipment › 37.28 Passenger seat › 37.28.70 Trim/stowage — Series 903 (models 662)

AR91.21-D-5746A

Remove/install panel at right side on bench seat housing

26.4.04

MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA

Remove/install panel at right side on bench seat housing

D91.21-0006-09

1 Bolts

2 Bolts

5 Trim panel

3 Screw

4 Bolts

Remove/Install

Danger!

Risk of injury caused by body parts becoming jammed, pinched or severed by doors, covers, flaps or by loose components

Keep body parts well clear when moving doors, covers, flaps and components. Wear protective gloves and protective shoes.

AS00.00-Z-0025-01A

1

Remove bench

AR91.21-D-4000A

2

Remove cover caps from screws (1)

3

Remove bolts (1)

Painted shims.

4

Release seat bolster and fold up

See Operator's Manual

5

Remove cover caps from screws (2)

6

Unscrew bolts (2)

Painted shims.

7

Tilt bench seat to rear

8

Remove bolt (3)

Installation: Bolt (3) fixed on inside with clamp, which has to be fitted again.

9

Remove bolts (4).

10

Remove trim panel (5)

11

Install in the reverse order

Referenced documents