ar9110p3290ff

Remove/install front seat padding

Type ar · topic 91.10 · version 0100 · 2004-10-14

Applies to: MODEL 454.0 with CODE (S17) Heated seats (FFO)

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.10 Front seats — Series 454 (models 0**)

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.41 Seat cushion — Series 454 (models 0**)

EinPAS 37 Interior equipment › 37.26 Front seat › 37.26.42 Seat backrest/head restraint — Series 454 (models 0**)

AR91.10-P-3290FF

Remove/install front seat padding

4.8.04

MODEL 454.0 with CODE (S17) Heated seats (FFO)

Remove/install front seat padding

P91.18-2163-09

Shown on right front seat without code (S20) Seat height adjustment (FFO)

1 Terminal strip

2 Seat cushion frame

5 Cover

3 Clip

4 Seat cushion

Remove/install front seat padding

P91.30-2198-11

Shown on removed right front seat with code (S20) Seat height adjustment (FFO)

6 Cross strut

7 Electrical connector

8 Bracket

9 Clip

10 Connector

11 Cover

12 Heated seats wiring harness

13 Foam part

Remove/Install

1.1

Remove outer paneling from seat frame

In vehicles without code (S20) Seat height adjustment (FFO)

AR91.10-P-1056FF

1.2

Remove seat height adjustment paneling from seat frame

In vehicles with code (S20) Seat height adjustment (FFO)

AR91.10-P-1056FH

2

Remove seat backrest unlocking mechanism paneling from seat frame

AR91.10-P-1056FG

3

Unplug electrical connector (7)

4

Unclip clips (9) of heated seats wiring harness (12)

Installation: Install new clips (9).

5

Unclip plugs (10) of heated seats wiring harness (12)

Note correct installation positions.

6

Detach heated seats wiring harness (12) from bracket (8)

7

Push down seat cushion (4) at rear and detach rear terminal strip (1) from seat cushion frame (2)

8

Run cover (5) with terminal strip (1) between seat cushion (4) and seat backrest

9

Remove clips (3)

10

Push down seat cushion (4) and detach remaining terminal strips (arrows) from seat cushion frame (2)

11

Remove seat cushion (4)

Installation: lead heated seats wiring harness (12) between cross strut (6) of seat cushion frame (2) and cover (11) of seat cushion frame (2).

12

Detach cover (5) from foam part (13)

AR91.18-P-1820-03FG

*454589023700

Installation: When replacing the foam part (13), a new heated cushion must be glued to the new foam part (13).

See

Remove/install heated cushion, front seat cushion

AR91.30-P-0005FF

13

Install in the reverse order

Remove/install front seat padding

Pliers

454 589 02 37 00

Referenced documents