ar8840p3300a

Removing and installing deflector for retaining hook

Type ar · topic 88.40 · version 0100 · 2004-10-21

Applies to: MODEL 202 up to 31.10.93

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.40 Engine hood, front flap — Series 202

EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.30 Engine hood — Series 202

AR88.40-P-3300A

Removing and installing deflector for retaining hook

21.10.99

MODEL 202 up to 31.10.93

Removing and installing deflector for retaining hook

P88.40-0225-01

Modification notes

21.10.99

Replaces SI 88/35 dated 21.4.94

Remove SI 88/35 from your file.

Removing, installing

1

Remove deflector.

Deflector for retaining hook with additional installation hook

Model 202

BT88.40-P-0001-01A

2

Measure upper frame cross member according to dimensions X and Y specified and mark (arrow).

Use caliper gauge.

Engine hood

Model 202

*BE88.40-P-1001-01A

3

Center-punch marked point.

4

Drill center-punched point (arrow).

Use approx. 8 mm bit.

5

Deburr hole.

6

Paint hole to match color of car.

7

Install deflector (C).

Hook installation hook into 8 mm hole and clip in.

Adjustment values for engine hood

Number

Designation

Model 202 up to 10/93

BE88.40-P-1001-01A

Deflector for retaining hook

Dimension "X"

mm

68

Dimension "Y"

mm

4.5

See figure

-

Referenced documents