ar8820p2000v

Remove/install front bumper

Type ar · topic 88.20 · version 0103 · 2008-02-04

Applies to: MODEL 171.4

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.20 Bumpers — Series 171 (models 4**)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.30 Front bumper — Series 171 (models 4**)

AR88.20-P-2000V

Remove/install front bumper

23.1.08

MODEL 171.4

Remove/install front bumper

P88.20-2495-09

Shown on vehicle up to 2.3.08 without code (809) Model year 2009

1 Front bumper

2 Height stops

4 Screw

E5/1 Left front fog lamp

E5/2 Right fog lamp

5 Nut

B14 Outside temperature display temperature sensor

Remove/install front bumper

P88.20-2542-06

Shown on vehicle up to 2.3.08 without code (809) Model year 2009

9 Screw

10 Bolts

11 Fender liner front section

X26/27 PTS, front bumper connector (with code (220) Parktronic system (PTS))

Remove/install front bumper

P88.20-2494-09

Shown on vehicle up to 2.3.08 without code (809) Model year 2009

1 Front bumper

8 Hook

7 Bolts

Remove/install

1

Open engine hood

2

Unscrew height stops (2)

Installation: Adjust height stops (2). See:

Adjust engine hood

AR88.40-P-3020V

3

Remove left and right bolt (4)

4

Raise vehicle with vehicle lift

AR00.60-P-1000V

5

Unscrew bolt (9)

Left and right sides of the vehicle.

6

Completely turn front wheels to right and unscrew bolts (10)

Left side of vehicle

7

Pull inner fender front section (11) toward rear until bolts (7) and the electrical connector on the left fog lamp (E5/1) are accessible

Left side of vehicle

8

Remove bolts (7)

Left side of vehicle

9

Disconnect electrical connector from left fog lamp (E5/1)

10

Completely turn front wheels to left and unscrew bolts (10)

Right side of vehicle

11

Pull inner fender front section (11) toward rear until bolts (7) and the electrical connector on the right fog lamp (E5/2) are accessible

Right side of vehicle

12

Remove bolts (7)

Right side of vehicle

13

Disconnect electrical connector from right fog lamp (E5/2)

14

Unclip outside temperature display temperature sensor (B14) from front bumper (1)

15

Disconnect PTS, front bumper connector (X26/27)

On vehicles with code (220) Parktronic system (PTS)

16

Unscrew nuts (5).

17

Remove front bumper (1) from vehicle with helper

Installation: Ensure that hooks (8) are seated correctly in recesses on left and right front fender.

18

Disassemble front bumper (1)

Only when replacing front bumper (1).

On vehicles up to 2.3.08 without code (809) Model year 2009 and without code (220) Parktronic system (PTS)

AR88.20-P-2050V

On vehicles up to 2.3.08 without code (809) Model year 2009 with code (220) Parktronic system (PTS)

AR88.20-P-2050VA

On vehicles as of 3.3.08 or with code (809) Model year 2009

AR88.20-P-2050VB

19

Install in the reverse order

20

Check adjustment for left fog lamp (E5/1) and right fog lamp (E5/2), correct if necessary

Check and correct the adjustment of the headlamps

AP82.10-P-8260V

Referenced documents