ar8820b2000c

Remove/install front bumper

Type ar · topic 88.20 · version 0100 · 2016-02-12

Applies to: Body 693.810 with Vehicle 693.1

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.20 Bumpers — Series 693 (models 1**, 810)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.30 Front bumper — Series 693 (models 1**, 810)

AR88.20-B-2000C

Remove/install front bumper

12.02.16

Body 693.810 with Vehicle 693.1

Remove/install front bumper

B88.10-0007-06

1 Torx type bolt

2 Washer

3 Bumper

4 Electrical connector

5 Washer

6 Screw

7 Washer

8 Screw

9 Covering

Remove and install

1

Loosen the bolts (1) and remove the bumper (3) attachment washers (2)

*BA88.20-B-1001-01A

Danger!

Risk of injury by trapping and crushing when tilting the cabin

During cab tilting forward and back, do not enter into the tilting area and take preventive measures to prevent the entry of unauthorized persons. Always tilt the cab to its final position and lock it with the safety device.

AS60.80-B-0001-01A

2

Tilt the cabin

AR60.80-B-0010A

3

Remove the bolts (8) and the coverings (9) securing washers (7) and remove the coverings on the right and left sides, respectively.

4

Disconnect the electrical connectors (4) of the headlights and lights mounted on the bumper (3), respectively on the right and left sides

5

Remove the screws (6) and washers (5) for securing the bumper (3), respectively on the right and left sides and remove the bumper

*BA88.20-B-1002-01A

6

Install in reverse order

Bumper

Número

Denominação

Cabs 693.8; 696.8

BA88.20-B-1001-01A

Torx bolt attaching the bumper

M10

Nm

25

BA88.20-B-1002-01A

Bumper fastening bolt

M10

Nm

40

Referenced documents