ar8810p1000fa

Removing and installing front fender

Type ar · topic 88.10 · version 0101 · 2010-03-29

Applies to: MODEL 210.0 /2 as of 1.6.99

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.10 Fenders — Series 210 (models 0**, 2**)

EinPAS 35 Body/frame/detachable parts › 35.37 Fender › 35.37.30 Front fender — Series 210 (models 0**, 2**)

AR88.10-P-1000FA

Removing and installing front fender

17.3.10

MODEL 210.0 /2 as of 1.6.99

Removing and installing front fender

P88.10-2027-06

1 Fender

2 Screws

3 Cover

4 Screws

5 Screw

6 Screws

7 Mount

Removal, installation

Removing inner fender is not necessary

1

Remove front bumper

AR88.20-P-2000FA

2

Unscrew screws (2) from headlamps

3

Carefully press off cover (3) and remove

*115589035900

4

Unscrew screws (4)

For this purpose unscrew rocker panel in front area and carefully pull downward

5

Unscrew screw (5)

For this purpose open door completely

6

Unscrew screws (6)

7

Remove fender (7)

When replacing reassemble fender mount (7), for this purpose drill rivet heads off of pop rivets and rivet mount (7) to new fender

Hand riveter

8

Install in opposite order

When installing observe correct position in relation to driver's door and engine hood, check splash guard for correct mounting, glue on if applicable

*BR00.45-Z-1003-02A

Repair materials

Number

Designation

Order number

BR00.45-Z-1003-02A

Adhesive/Dekalin 3649

A 000 989 82 71

Removing and installing front fender

Long wedge

115 589 03 59 00

Referenced documents