Remove/install temperature sensor for gas cooker

AR86.60-S-0015E

Remove/install temperature sensor for gas cooker

08.09.2016

Model

447.8

with code ZK7 (Equipment line MARCO POLO)

Modification notes

24.08.2016

Safety notice replaced

Notice block located in front of work description

1

Electrical connector

2

Gas control valve

3

Boiler/sink

9

Temperature sensor

4

Attachment

7

Cover

10

Rotary knob

5

Bolts

8

Lock washer

6

Cover

9

Temperature sensor

 Danger !

Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas.

Remove any sources of ignition.
Protective clothing, safety gloves and safety glasses must always be worn.
Ensure that the work area is adequately ventilated.
When working on vehicles at ambient temperatures over 60 °C, all gas cylinders must be removed.

AS00.00-Z-0018-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Close shutoff valve on gas cylinder

 See owner's manual.

2

Remove drawer below gas cooker

AR86.60-S-0020E

3

Remove cover below gas cooker

4

Open cover of gas cooker

5

Remove electrical connector (1) from gas control unit (2)

6

Remove attachment (4)

7

Unscrew bolts (5) and remove covering (6)

8

Take off cover (7)

 Installation: Observe installation position for cover (7).

9

Remove circlip (8)

10

Remove temperature sensor (9) downward from cooker and kitchen sink unit (3)

 Installation: Observe installation position of electrical lines of temperature sensor (9).

11

Install in the reverse order



Check

12

Close shutoff valve on gas cylinder

 See owner's manual.

13

Open gas shut-off cock on kitchenette

 See owner's manual.

14

Open corresponding gas shut-off valve (2) using rotary knob (10)

15

Check corresponding gas cooker for proper function

 Allow flame to burn for at least 30 s.

If no flame is present.



Check second gas cooker for proper function

Flame is present.



Check piezo ignition system of defective gas cooker

AR86.60-S-2169E

If second gas cooker has no flame.



Check gas feed

16

Close gas control valve (2) with aid of rotary knob (10)

17

Close gas shut-off cock in kitchenette

 See owner's manual.

18

Close shutoff valve on gas cylinder

 See owner's manual.