Remove/install hot water heater/sink combination

AR86.60-D-0010EC

Remove/install hot water heater/sink combination

30.05.2016

Model

903.6

with code ZL9 (James Cook touring camper)

1

Gas shut-off cocks

2

Hose

3

Hose clamps

4

Hoses

5

Electrical connector

6

Drawer

7

Connection piece

8

Caps

11

Hose clamp

9

Bolts

10

Stove/sink unit

 Danger !

Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas.

Remove any sources of ignition.
Protective clothing, safety gloves and safety glasses must always be worn.
Ensure that the work area is adequately ventilated.
When working on vehicles at ambient temperatures over 60 °C, all gas cylinders must be removed.

AS00.00-Z-0018-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Close gas shutoff cocks (1)

 See Owner's Manual.

2

Unfasten hose clamp (11)

3

Detach hose (2)

4

Loosen hose clamps (3)

5

Mark position of hoses (4)

6

Detach hoses (4)

7

Check hose clamps (3, 11) and hoses (2, 4) for damage, replace if necessary

8

Disconnect electrical connection (5)

9

Remove drawer (6)

AR86.60-D-0020EC

10

Disconnect connection piece (7)

11

Remove caps (8)

12

Loosen screw/bolts (9)

13

Remove stove/sink unit (10)

14

Install in the reverse order

15

Check gas system for leakage

 It is necessary that the leaktightness and function test is performed and documented by an authorized specialist after opening the gas system.

16

Check fresh water system for leakage

17

Check sealant in waste water tank