AR86.30-D-0073A | Remove/install sewage tank | 12.10.09 |
MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
D86.60-0017-09
3 Caps
5 Covers
4 Bolts
D86.30-0072-09
1 Sewage tank
2 Fitting
7 Clip
11 Tensioning strap
12 Bolts
13 Anchoring lug
8 Venting hose
9 Electrical connector
10 Nut
D86.30-0082-04
2 Fitting
6 Bolts
D86.30-0076-09
14 Spare wheel
15 Bayonet locks
16 Hose
17 Fitting
D86.30-0080-09
1 Sewage tank
18 Bolts
19 Gasket
20 Slide
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. | |
Danger! | Risk of explosion caused by the ignition of methane gas exiting from components of the black water system and gray water system. Risk of injury caused by burns to the skin and eyes and by the inhalation of methane gas or by skin contact with feces. | Wear respiratory protection, protective gloves and safety glasses. Before commencing work, ensure that all sources of ignition have been removed and the black water system has been completely emptied. | |
1 | Empty sewage tank (1) | See Operator's Manual | |
2 | Remove caps (3) | ||
3 | Remove bolts (4) | ||
4 | Remove covers (5) | ||
5 | Remove sealant between sewage tank (1) and fittings (2) | ||
6 | Remove toilet | ||
7 | Remove bolts (6) | ||
8 | Pull out fittings (2) | ||
9 | Loosen the clamp (7) | ||
10 | Pull off vent hose (8) | ||
11 | Disconnect electrical connector (9) | ||
12 | Unscrew nut (10) | ||
13 | Loosen tensioning strap (11) | ||
14 | Remove bolt (12) | ||
15 | Remove anchoring lug (13) | ||
16 | Remove spare tire (14) | See Operator's Manual | |
17 | Loosen bayonet locks (15) | ||
18 | Remove hose (16) | ||
19 | Remove sealant between vehicle floor and fittings (17) (arrow) | ||
20 | Lift sewage tank (1) | Until screws (18) are accessible. | |
21 | Remove bolts (18) | ||
22 | Remove sewage tank (1) | Installation: Check seal (19) on slide (20) for damage, replace if necessary, otherwise sewage tank (1) can be damaged. | |
23 | Install in the reverse order | ||
24 | Check sealant in waste water tank |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1027-01A | Sealant, gray No. 7121; 310 ml | A 001 989 64 20 |
Referenced documents
- ar8630d0071a Check sewer system for leakage
- ar8630d0074a Remove/install toilet
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as8600z000301a Risk of explosion caused by the ignition of methane gas exiting from components of the black water system and gray water system. Risk of injury caused by burns to the skin and eyes and by the inhalation of methane gas or by skin contact