AR86.30-D-0069A | Remove/install wastewater tank slide valve | 15.3.10 |
MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
D86.30-0123-09
1 Clip
2 Clip
3 Drain pipe
7 Slide valve
8 Union nut
4 Bracket
5 Hose
6 Sequence
| Remove | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer. | |
Danger! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and undeburred vehicle parts. Deburr replacement panels. | |
1 | Drain wastewater tank | See Operating Instructions | |
2 | Slacken clamp (1) | ||
3 | Slacken clamp (2) | ||
4 | Remove drain pipe (3) | ||
5 | Unscrew bracket (4) with handle from rear panel | ||
6 | Disconnect hose (5) from drain (6) | ||
7 | Unscrew union nut (8) | ||
8 | Remove slide valve (7) with drain (6) | Slide valve (7) is glued to drain (6) and cannot be separated from drain (6) without damage | |
| Install | ||
9 | Screw slide valve (7) to wastewater tank with union nut (8) | ||
10 | Unscrew bracket (4) to rear panel with handle | ||
11 | Install drain (6) | Glue drain (6) to slide valve (7). Ensure that leakage is not present between both components | |
Adhesives | |||
12 | Connect hose (5) to drain (6) | ||
13 | Install drain pipe (4) | ||
14 | Tighten clamp (2) | ||
15 | Tighten clamp (1) | ||
16 | Check sewer system for leakage |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1018-02A | Adhesive, Sikaflex 252, 330 ml | A 005 989 36 71 |
Referenced documents
- ar8630d0071a Check sewer system for leakage
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as0000z001701b Risk of injury caused by scraping or cutting body parts on sharp vehicle parts