ar8370d7048a

Remove/install air intake duct for heater

Type ar · topic 83.70 · version 0101 · 2014-12-19

Applies to: MODEL 906.657 with CODE PE4 (DCAA bus master code, Argen) Webasto Air Top 2000 ST MODEL 906.657 with CODE PE5 (Mastercode, bus seats on raised base, Argen) Webasto Air Top 2000 ST

Where it sits

Function group 3 Body › 83 Climate control › 83.70 Auxiliary/supplementary heater — Series 906 (models 657)

EinPAS 39 Heating/ventilation/cooling › 39.25 Stationary heater/auxiliary heater › 39.25.13 Line/hose/valve — Series 906 (models 657)

AR83.70-D-7048A

Remove/install air intake duct for heater

27.11.2014

MODEL

906.657

with CODE PE4 (DCAA bus master code, Argen)

Webasto Air Top 2000 ST

MODEL

906.657

with CODE PE5 (Mastercode, bus seats on raised base, Argen)

Webasto Air Top 2000 ST

Remove/install air intake duct for heater

1

Heater unit

2

Bracket

3

Exhaust line

4

Air intake duct

Pfeil

Access opening

D83.70-1506-05

Remove/install

1

Release heater (1) with bracket (2) from mounting bracket and lift up

AR83.70-D-5330A

Do not remove heater (1) with bracket (2). Do not disconnect fuel line.

2

Expose air intake duct (4) of fuel line

Installation: Install fuel line on air intake duct (4) so that it does not make contact with exhaust line (3).

3

Remove air intake duct (4) from heater (1) and take out

Access through access openings (arrows) in bracket (2).
Pay attention to installation position.

4

Install in the reverse order

Referenced documents