ar8370d5945ec

Remove/install auxiliary heater

Type ar · topic 83.70 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Where it sits

Function group 3 Body › 83 Climate control › 83.70 Auxiliary/supplementary heater — Series 903 (models 6**)

EinPAS 39 Heating/ventilation/cooling › 39.25 Stationary heater/auxiliary heater › 39.25.5 Stationary heater/auxiliary heating, complete — Series 903 (models 6**)

AR83.70-D-5945EC

Remove/install auxiliary heater

17.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Remove/install auxiliary heater

D83.70-1325-09

1 Clip

2 Clip

3 Exhaust muffler

4 Exhaust pipe

5 Clip

11 Clip

12 Fuel pipe

13 Auxiliary heater

6 Fresh air hose

7 Clip

8 Preheating hose

9 Bolts

10 Clutches

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.

Deburr repair panels.

AS00.00-Z-0017-01A

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contact with fuel.

No fire, sparks, open flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Danger!

Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit

Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

1

Undo clip (1)

2

Undo clip (2)

3

Detach exhaust muffler (3)

4

Push exhaust pipe (4) with exhaust damper (3) to the rear

5

Undo clip (5) on fresh air hose (6).

6

Detach fresh air hose (6)

7

Undo clip (7) on preheating hose (8).

8

Detach preheating hose (8)

9

Remove bolts (9)

10

Remove auxiliary heater (13)

11

Unlock and unplug connectors (10)

12

Remove clip (11) on fuel line (12)

Installation: Replace clip (11).

13

Detach fuel line (12)

Catch the fuel that leaking in a suitable container; plug the fuel line (12).

Set of plugs

*129589009100

14

Install in the reverse order

15

Perform a function test

Check function of auxiliary heater (13)

Remove/install auxiliary heater

Set of plugs

129 589 00 91 00

Referenced documents