AR83.70-D-5652D | Removing and installing fuel metering pump | 28.11.96 |
MODEL 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation D3L-C
D83.70-0038-06
1 Electrical connector
2 Electrical connector
3 Hose clamp
4 Heater fuel line
5 Fuel metering pump
6 Holder
7 Hose clamp
8 Fuel line to tank
9 Washer
10 Hex. nut
| Removal, installation | ||
Danger! | Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation | Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves. | |
Danger! | Fuel vapors present an explosion hazard. Fuel vapors are toxic when inhaled or absorbed. Contact with fuel can cause eye and skin injury. | Fire, open lights and smoking prohibited. Wear protective clothing when handling fuel. | |
1 | Remove heater | Models 901.36/37/46, 902.36/37/46/47, 903.36/37/46/47, 904.36/46 left-hand steering | |
Models 901.36/37/46, 902.36/37/46/47, 903.36/37/46/47, 904.36/46 right-hand steering | |||
2 | Loosen hose clamp (3) and pull off fuel | Catch fuel running out. | |
3 | Loosen hose clamp (7) and pull off fuel | Catch fuel running out. | |
4 | Disconnect electrical connectors (1, 2) | ||
5 | Remove fuel metering pump (5) | ||
6 | Install in opposite order |
Referenced documents
- ar8370d5302d Removing and installing auxiliary heater
- ar8370d5302e Removing and installing auxiliary heater
- as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.
- as8370z000201a Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit