ar8350d6460b

Remove/install evaporator temperature sensor of roof-mounted air conditioning system

Type ar · topic 83.50 · version 0103 · 2018-09-28

Applies to: Model 906.6/7 with code H08 (Roof-mounted air conditioning system, reinforced) with code HH9 (Air conditioner, automatic heater control)

Where it sits

Function group 3 Body › 83 Climate control › 83.50 Rear air-conditioning — Series 906 (models 6**, 7**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.12 Sensor/switch/wiring harness — Series 906 (models 6**, 7**)

AR83.50-D-6460B

Remove/install evaporator temperature sensor of roof-mounted air conditioning system

28.09.2018

Model

906.6/7

with code H08 (Roof-mounted air conditioning system, reinforced)

with code HH9 (Air conditioner, automatic heater control)

Remove/install evaporator temperature sensor of roof-mounted air conditioning system

D83.50-1292-09

1

Electrical connector

A32/3

Rear heavy duty automatic air conditioning recirculation unit

2

AC housing

A32/3b1

Evaporator temperature sensor

Remove/install

Danger

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

Model 906.6/7
with code H08 (Roof-mounted air conditioning system, reinforced)
with code HH9 (Air conditioner, automatic heater control)
except code Z29 (James Cook touring camper, NAFTA)
except code ZU8 (National version for USA)

AS65.00-Z-0002-01A

1

Remove outer paneling of evaporator unit

AR83.50-D-5010C

2

Disconnect electrical connection (1)

3

Unclip catch hook (arrow) and remove evaporator temperature sensor (A32/3b1) from evaporator housing (2) of rear reinforced automatic air conditioning air recirculation unit (A32/3)

4

Install in the reverse order

Referenced documents