ar8350d5010c

Remove/install evaporator unit paneling

Type ar · topic 83.50 · version 0102 · 2016-06-08

Applies to: Model 906.6/7 with code H08 (Roof-mounted air conditioning system, reinforced) with code HH9 (Air conditioner, automatic heater control) Outer cover

Where it sits

Function group 3 Body › 83 Climate control › 83.50 Rear air-conditioning — Series 906 (models 6**, 7**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 906 (models 6**, 7**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 906 (models 6**, 7**)

AR83.50-D-5010C

Remove/install evaporator unit paneling

07.06.2016

Model

906.6/7

with code H08 (Roof-mounted air conditioning system, reinforced)

with code HH9 (Air conditioner, automatic heater control)

Outer cover

Remove/install evaporator unit paneling

D83.50-1294-08

1

Cover

4

Right air grille

7

Nut

2

Left air grille

5

Refrigerant line

3

Strut

6

Bolts

Remove/install evaporator unit paneling

D83.50-1295-08

1

Cover

8

Damping material

Remove/install

Danger !

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

Model 906.6/7
with code H08 (Roof-mounted air conditioning system, reinforced)
with code HH9 (Air conditioner, automatic heater control)
except code Z29 (James Cook touring camper, NAFTA)
except code ZU8 (National version for USA)Verkleidung außen

AS65.00-Z-0002-01A

1

Remove paneling of condenser unit

AR83.50-D-5000B

2

Unclip left air grille (2) and right air grille (4)

3

Unscrew nut (7) of refrigerant line (5) at strut (3)

4

Remove screws/bolts (6) at left and right at strut (3)

5

Remove brace (3)

Helper required.

6

Remove screws/bolts (arrows) of paneling (1)

7

Remove trim panel (1)


Remove paneling (1) carefully.
Otherwise the paint can be damaged.

Helper required.

Installation: Ensure that paneling (1) is seated correctly.

8

Remove vapor barrier (8)

Helper required.

Installation: Ensure that dampening (8) is seated correctly.

9

Install in the reverse order

Referenced documents