Remove and install evaporator temperature sensor

AR83.30-D-8085F

Remove and install evaporator temperature sensor

04.06.2013

MODEL

909

with CODE HH9 (Regulated air conditioning (Tempmatic))

1

Connector

2

Evaporator temperature sensor

 

Remove/install

 Danger !

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground line from battery



Notes on battery

AH54.10-P-0001-01A

2

Remove cover of radio installation slot

3

Remove glove box

4

Remove stowage compartment below pen holder

5

Remove covering on instrument cluster

AR68.10-D-1550F

6

Remove instrument cluster

AR54.30-D-6015F

7

Remove stowage compartment above glove compartment

AR68.10-D-1515F

8

Remove speaker

MODEL 909
with CODE ER0 (Radio preinstallation with antenna and 2 speakers)
with CODE HH9 (Regulated air conditioning (Tempmatic))

AR82.62-D-7833F

9

Remove cover on center part of dashboard

AR68.10-D-1190F

10

Remove air conditioning pushbutton control unit

AR83.25-D-1124FA

11

Remove drawer

AR68.10-D-1195F

12

Remove top part of dashboard

AR68.10-D-1020F

13

Remove central electric unit

AR54.25-D-1382F

14

Remove air nozzles in instrument panel

AR68.10-D-1110F

15

Remove dashboard

AR68.10-D-1000F

16

Detach plug (1) from evaporator temperature sensor (2)

17

Remove evaporator temperature sensor (2) from heater housing

18

Install in the reverse order

19

Set time on instrument cluster

20

Set time on timer for auxiliary heater

MODEL 909
with CODE H12 (Auxiliary heater (warm water))
with CODE HH9 (Regulated air conditioning (Tempmatic))
MODEL 909
with CODE H86 (Chronometer with relay for independent heating)
with CODE HH9 (Regulated air conditioning (Tempmatic))
MODEL 909
with CODE HH9 (Regulated air conditioning (Tempmatic))
with CODE HZ5 (10 kW warm water auxiliary heater with timer)

21

Connect diagnostic system and perform quick test



AD00.00-D-2000-04F

 Delete DTC memory if necessary.