ar8325d1124fa

Remove and install air conditioning control and operating unit

Type ar · topic 83.25 · version 0100 · 2013-06-19

Applies to: MODEL 909 with CODE HH9 (Regulated air conditioning (Tempmatic))

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 909

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.11 Control unit/relay — Series 909

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.33 Operating unit/cable — Series 909

AR83.25-D-1124FA

Remove and install air conditioning control and operating unit

23.05.2013

MODEL

909

with CODE HH9 (Regulated air conditioning (Tempmatic))

Remove and install air conditioning control and operating unit

1

Climate control control and operating unit

2

Cable

3

Cable

4

Electrical connector

5

Electrical connector

6

Screw

7

Bracket

D83.20-1101-11

Remove/install

2

Remove stowage compartment below pen holder

3

Remove cover on center part of dashboard

AR68.10-D-1190F

4

Remove screw/bolts (6)

5

Mark wires (2, 3) and remove from climate control control and operating unit (1)

Installation: The wire (3) for the lower adjustment lever must be attached to the front adjusting knurl of the climate control control and operating unit (1).

6

Detach plugs (4, 5)

7

Remove bracket (7)

When replacing the climate control control and operating unit (1).

8

Install in the reverse order

Referenced documents