ar8330d5445a

Remove/install refrigerant pressure sensor

Type ar · topic 83.30 · version 0108 · 2017-04-27

Applies to: Model 906.6/7 with code HH7 (Roof-mounted air conditioning system, basic) with code HH9 (Air conditioner, automatic heater control) Model 906.633/655/657 as of 4/14/14 with code HK4 (Rear air conditioning, reinforced) with code IR4 (Wheelbase 3665 mm) with code ZL3 (National version for Latin America) Model 906 with code HH9 (Air conditioner, automatic heater control) except code HH7 (Roof-mounted air conditioning system, basic)

Where it sits

Function group 3 Body › 83 Climate control › 83.30 Air conditioning — Series 906

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.12 Sensor/switch/wiring harness — Series 906

AR83.30-D-5445A

Remove/install refrigerant pressure sensor

11.04.2017

Model

906.6/7

with code HH7 (Roof-mounted air conditioning system, basic)

with code HH9 (Air conditioner, automatic heater control)

Model

906.633/655/657 as of 4/14/14

with code HK4 (Rear air conditioning, reinforced)

with code IR4 (Wheelbase 3665 mm)

with code ZL3 (National version for Latin America)

Model

906

with code HH9 (Air conditioner, automatic heater control)

except code HH7 (Roof-mounted air conditioning system, basic)

Remove/install refrigerant pressure sensor

1

Condenser

2

Electrical connector

B12

Refrigerant pressure sensor

D83.30-1199-05

Topical note

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

Remove/install

1

Remove air filter housing

Model 906.6/7 with engine 271.951
with code HH7 (Roof-mounted air conditioning system, basic)
with code HH9 (Air conditioner, automatic heater control)

AR09.10-D-1150NG

2

Remove fluid reservoir


Model 906 with code XM0 (Facelift) or with code XM5 (Facelift Latin America)

AR83.30-D-6520M

Model 906 except code XM0 (Facelift) except code XM5 (Facelift Latin America)

AR83.30-D-6520C

3

Disconnect electrical plug (2) from refrigerant pressure sensor (B12)

4

Unscrew refrigerant pressure sensor (B12) from the connector of the condenser (1)

Seal opening at condenser (1) with a stop plug.

Installation: Replace seal.

Refrigerant pressure sensor to condenser

*BA83.30-N-1002-01F

Record plug

*129589009100

5

Install in the reverse order

Air conditioning

Number

Designation

Model 906, 909 with code HH9

Model 906.6/7 with code HH7

BA83.30-N-1002-01F

Refrigerant pressure sensor to condenser

Nm

10

10

Air conditioning

Number

Designation

Model 906 as of 14.04.14 up to 31.12.15 with code HK4+IR4+ZL3 (without condenser module on roof (KONVEKTA))

Model 906 as of 01.01.16 with code HK4+IR4+ZL3 (without condenser module on roof (MAHLE))

BA83.30-N-1002-01F

Refrigerant pressure sensor to condenser

Nm

10

10

Remove/install refrigerant pressure sensor

129 589 00 91 00

Record plug

Referenced documents