ar8325p1404h

Remove/install right air inlet

Type ar · topic 83.25 · version 0102 · 2006-12-12

Applies to: MODEL 240

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 240

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 240

AR83.25-P-1404H

Remove/install right air inlet

16.8.02

MODEL 240

Remove/install right air inlet

P83.25-2148-07

1 Air inlet

2 Nuts

B31/1 AAC multifunction sensor

3 Electrical connector

4 Electrical connector

Remove/Install

1

Remove starter battery from engine compartment

AR54.10-P-0005HA

2

Remove water collector

AR83.25-P-1402H

3

Unscrew nuts (2)

4

Twist electrical connector (3) approx. 45° in direction of arrow and remove from the air inlet (1)

5

Disconnect electrical connector (4) from AAC multifunction sensor (B31/1)

6

Remove air inlet (1) from the engine compartment

7.1

Modify AAC multifunction sensor (B31/1)

Only when replacing air inlet (1).

8

Install in the reverse order

Referenced documents