ar8325p1402h

Remove/install water collector

Type ar · topic 83.25 · version 0102 · 2006-12-12

Applies to: MODEL 240

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 240

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.44 Trim/trim element/front protective paneling — Series 240

AR83.25-P-1402H

Remove/install water collector

2.9.02

MODEL 240

Remove/install water collector

P83.25-2152-08

Shown on model 240.078

1 Seal

2 Water collector

4 Bolt

3 Rubber seal

Remove/Install

1

Remove wiper arms

AR82.30-P-6100H

2

Remove seals (1) at the wiper shafts

3

Loosen rubber seal (3) in the area of the water collector (2)

4

Unscrew bolts (4) at the water collector (2)

5

Unclip water collector (2) in the area of the windshield (arrows)

*110589035900

6

Detach outer ends of the water collector (2) at the A-pillar and remove the water collector (2)

Lower engine hood slightly.

Installation: Ensure correct seating of the outer ends of the water collector (2) at the A-pillar.

7

Install in the reverse order

Remove/install water collector

Assembly wedge

110 589 03 59 00

Referenced documents