ar8325d1002a

Remove and install heater/ventilation actuation cables

Type ar · topic 83.25 · version 0101 · 2001-05-21

Applies to: MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.33 Operating unit/cable — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)

AR83.25-D-1002A

Remove and install heater/ventilation actuation cables

23.4.96

MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Remove and install heater/ventilation actuation cables

D83.20-0001-06

1 Retaining clamp

2 Regulating valve Bowden cable

3 Regulating valve lever

4 Retaining clamp

5 Heater flap Bowden cable

6 Heater flap lever

7 Heater flap Bowden cable

8 Retaining clamp

9 Heater flap lever

Removing, installing

1

Remove heater housing.

AR83.25-D-1000A

2

Detach retaining clamp (1), detach regulating valve Bowden cable (2) by turning at the regulating valve lever (3).

3

Detach retaining clamp (4), detach heater flap Bowden cable (5) by turning at the heater flap lever (6).

4

Detach retaining clamp (8), detach heater flap Bowden cable (7) by turning at the heater flap lever (9).

5

Install in reverse sequence.

Referenced documents