ar8320l2000va

Removing and installing heater pushbutton control module

Type ar · topic 83.20 · version 0100 · 2003-03-12

Applies to: MODEL 414.700 except CODE (H06) Air conditioning

Where it sits

Function group 3 Body › 83 Climate control › 83.20 Heating — Series 414 (models 700)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.11 Control unit/relay — Series 414 (models 700)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.33 Operating unit/cable — Series 414 (models 700)

AR83.20-L-2000VA

Removing and installing heater pushbutton control module

22.8.01

MODEL 414.700 except CODE (H06) Air conditioning

Removing and installing heater pushbutton control module

1 Center console, front

2 Cable

3 Cable

4 Cable

5 Connector

6 Connector
(only on engine 668)

N119 Heating pushbutton control module

L83.20-0003-03

Remove/install

1

Remove front center console (1)

AR68.20-L-2010VA

2

Disconnect connector (5, 6 ) from heater pushbutton control module (N119)

Connector (6) only on engine 668.

Loosen connector (6) by actuating (pivoting) the release lever.

3

Unhook control cables (2, 4)

First loosen red retaining clip and remove with control cable (2). Remove control cables from actuating levers.

4

Unhook control cable (3)

5

Remove heater pushbutton control
module (N119)

6

Install in the reverse sequence

7

Check for proper function

The control knobs should turn easily without sticking.Check illumination and all blower stages.

Referenced documents