Remove/install actuator motor for vent flaps

AR83.10-P-2012Q

Remove/install actuator motor for vent flaps

22.8.01

18.2.04

Disconnect/connect/remove ground lead from battery

 

Remove/Install

1.1

Remove operating / display unit with control unit

up to 31.5.04

with COMAND operating and display system code 352, with Japan version code 498

AR82.85-P-7472Q

as of 1.6.04

with Japan version code 498, with COMAND APS (with navigation) code 527, with COMAND APS USA (with navigation) code 530

AR82.85-P-7472QA

1.2

Remove radio

up to 31.5.04 ,

up to 31.5.04 with MB Audio 10 CD radio with VK/RDS code 756

AR82.60-P-7502Q

as of 1.6.04

AR82.60-P-7502QA

Up to 31.5.04 with Audio 30 APS code 353

AR82.61-P-7412P

As of 1.6.04 with Audio 50 APS MB radio code 525

AR82.61-P-7412QA

2.1

Remove stowage compartment below radio

With MB Audio 10 CC radio with VK/RDS,

with MB Audio 10 CD radio with VK/RDS, code 756

3

Remove lower section of instrument panel on driver side

AR68.10-P-1505Q

4.1

Remove ignition switch cable (1) from the electronic selector lever module control unit (N15/5)

On vehicles with transmission 722

 Press locking tab (1b) together and push coupling (1c) against the spring force into the electronic selector lever module control unit (N15/5), twist through approx. 90° (right or left) and pull off ignition lock control cable (1) (arrow).

5

Push damping (3) up

 For vehicles with transmission 722, expose the ignition lock control cable (1) and the electrical line (2) at comfort AAC (C-AAC) control and operating unit (N22/7).

6

Remove bolts (4)

7

Remove fresh air flaps actuator motor (M2/21)

8

Disconnect electrical connector (5)

9

Install in the reverse order

10

Connect STAR DIAGNOSIS, normalize fresh air flaps actuator motor (M2/21)

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A

11

Read out fault memory and erase

 Faults stored due to simulations, or cables being disconnected for assembly / testing operations, must be processed and erased from the fault memories after the work is completed.



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A

12

Perform function check

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00