Remove and install air distribution cables

AR83.10-P-1400FG

Remove and install air distribution cables

11.5.06

 

Remove/install



Bowden cable (6) and Bowden cable (8) can be removed separately

1

Set air distribution switch on the operating unit (3) to top position

 So the levers (5, 9) of the air flaps are at the rear stop.

2

Remove cover (2) on the front center console

AR68.20-P-2350FG

3.1

Remove heater/ventilation operating module

For vehicles without code (I77) Manual air conditioning

AR83.20-P-1850FF

3.2

Remove air conditioning pushbutton control unit

For vehicles with code (I77) Manual air conditioning

AR83.25-P-1124FG

4.1

Remove cover (1) below instrument panel on left

On vehicles with code (LHD) Left-hand drive vehicle

AR68.10-P-1500FF

4.2

Remove glove compartment

On vehicles with code (RHD) right-hand drive vehicle

AR68.10-P-1400FF

5

Unhook Bowden cable (6) from retaining clamp (10)

 Installation: Push lever (5) back to rear stop and lock Bowden cable (6) into the retaining clamp (10).

6

Release catch hook (4) on lever (5), unhook Bowden cable (6), route out of instrument panel and remove

 Do not damage catch hook (4), as otherwise the Bowden cable (6) can no longer be locked.

7

Unhook Bowden cable (8) from retaining clamp (7)

 Installation: Push lever (9) back to rear stop and lock Bowden cable (8) into the retaining clamp (7).

8

Release catch hook (4) on lever (9), unhook Bowden cable (8), route out of instrument panel and remove

 Do not damage catch hook (4), as otherwise the Bowden cable (8) can no longer be locked.

9

Install in the reverse order