ar6810p1400ff

Remove/install glove compartment

Type ar · topic 68.10 · version 0101 · 2004-07-28

Applies to: MODEL 454.0

Where it sits

Function group 3 Body › 68 Interior equipment › 68.10 Instrument panel — Series 454 (models 0**)

EinPAS 37 Interior equipment › 37.15 Instrument panel › 37.15.42 Glove compartment/stowage compartment/cup holder/ashtray — Series 454 (models 0**)

AR68.10-P-1400FF

Remove/install glove compartment

13.8.03

MODEL 454.0

Remove/install glove compartment

P68.10-3041-09

Shown on vehicle with code (LHD)
Left-hand steering

1 Glove compartment lid

2 Paneling

3 Center console cover

4 Bolt

9 Plug

10 Guide

E13/1 Glove compartment lamp

5 Bolts

6 Glove compartment

7 Footwell paneling

8 Retaining clamp

Removal/installation

1

Remove glove compartment cover (1)

AR68.10-P-1200FF

2

Remove footwell paneling (7)

On vehicles with code (LHD) left-hand steering remove right paneling and on vehicles with code (RHD) right-hand steering remove left paneling

AR68.30-P-4010FF

3

Remove center console cover (3) at front

AR68.20-P-2350FG

4

Pull paneling (2) out of retaining clips downward and remove

5

Unscrew bolts (4, 5)

6

Unclip glove compartment (6) from retaining clips (arrows) and lower until plug (9) and retaining clip (8) are accessible

Installation: Ensure that retaining clips (arrows) and guide (10) are seated properly.

7

Disconnect plug (9) from glove compartment lamp (E13/1) and loosen retaining clip (8)

8

Remove glove compartment (6)

9.1

Unclip glove compartment lamp (E13/1)

When replacing glove compartment (6).

10

Install in the reverse order

11

Check glove compartment lamp (E13/1) for proper function

Referenced documents