ar8262p7720ef

Remove/install loudspeaker amplifier control unit

Type ar · topic 82.62 · version 0100 · 2009-03-30

Applies to: MODEL 207.3 with CODE (810) Sound system

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.62 Loudspeakers, amplifiers, antennas — Series 207 (models 3**)

EinPAS 31 Communication/information/entertainment › 31.75 Audio playback/audio output › 31.75.11 Control unit/relay — Series 207 (models 3**)

AR82.62-P-7720EF

Remove/install loudspeaker amplifier control unit

18.3.09

MODEL 207.3 with CODE (810) Sound system

Remove/install loudspeaker amplifier control unit

P82.62-3498-09

1 Rear center section paneling

2 Left side paneling

3 Nut

4 Electrical connector

N40/3 Sound system amplifier control unit

5 Electrical connector with fiber optic cable

6 Nut

7 Bracket

8 Clip

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on avoiding damage to fiber optic cables during repair work

AH82.60-P-0001-05AK

1

Buffer basic data of sound system amplifier control unit (N40/3) in STAR DIAGNOSIS

When replacing the sound system amplifier control unit (N40/3).

Installation: Transmit buffered basic data to new sound system amplifier control unit (N40/3).

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

2

Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit

KEYLESS-GO start/stop button only on vehicles with code (889) Keyless-Go.

3

Remove rear center section paneling (1)

AR68.30-P-4785EC

4

Detach left side paneling (2) far enough to enable the sound system amplifier control unit (N40/3) to be removed

AR68.30-P-4600EC

5

Unscrew nuts (3)

6

Slacken off nut (6) until the bracket (7) is accessible

7

Unclip clips (8) on bracket (7)

8

Separate electrical connectors (4)

9

Disconnect electrical connector with fiber optic cable (5)

Notes on avoiding damage to fiber optic cables during repair work

With Media Oriented System Transport (MOST)

AH82.60-P-0001-05AK

10

Remove sound system amplifier control unit (N40/3) with bracket (7)

11

Remove bracket (7) of sound system amplifier control unit (N40/3)

When replacing bracket (7) or sound system amplifier control unit (N40/3).

12

Install in the reverse order

Referenced documents