AR82.60-P-7545RT | Remove/install satellite radio control unit | 24.4.07 |
MODEL 251
with CODE (491) USA version
with CODE (536) SIRIUS satellite radio
with CODE (808) Model year 2008
P82.60-5938-07
1 Bracket
2 Nuts
3 Intermediate bottom
4 Electrical connectors
5 Nuts
N87/5 SDAR control unit
| Remove/install | ||
| Notes on avoiding damage to electronic components due to electrostatic discharge | All models | |
1 | Turn key in ignition switch to position "0". | On vehicles with Keyless-Go, code 889: Press keyless go start/stop button repeatedly until ignition is switched off | |
2 | Remove rear seat | 2nd seat row, right. | |
3 | Remove door sill molding | Only right rear. | |
4 | Remove paneling on B-pillar | Lower section only. Only on vehicles with center rear individual seat, code 225. | |
5 | Unclip anchoring lug cover | ||
6 | Unscrew bolt beneath | | |
7 | Remove anchoring lug | Installation: Ensure that guide lugs are installed correctly. | |
8 | Unclip rear seat rail covers from front seat | ||
9 | Lift center floor cover | ||
10 | Unclip brackets (1) | ||
11 | Remove nuts (2) | ||
12 | Remove intermediate bottom (3) | ||
13 | Separate electrical connectors (4) | ||
14 | Remove nuts (5) | ||
15 | Remove SDAR control unit (N87/5) | ||
16 | Install in the reverse order |
Cargo retainers
Referenced documents
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar6830p4100rt Remove/install door sill molding
- ar6830p4100rta Remove/install door sill molding
- ar6830p4700rt Remove/install paneling on B-pillar
- ar9112p1000rt Remove/install rear seat
- ar9112p1000rta Remove/install rear seat
- ar9112p1000rtb Remove/install rear seat