ar8235p6002sr

Remove/install windshield washer system pump

Type ar · topic 82.35 · version 0100 · 2014-08-04

Applies to: MODEL 453

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 453

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.41 Pump/container/heat exchanger — Series 453

AR82.35-P-6002SR

Remove/install windshield washer system pump

21.07.2014

MODEL

453

Remove/install windshield washer system pump

M5/1

Windshield washer system pump

2

Windshield washer system washer fluid reservoir

3

Hoses

4

Electrical connector

P82.35-2747-11

Remove/install

1

Remove washer fluid reservoir from windshield washer system (2) and disconnect electrical connector (4)

AR82.35-P-6000SR

2

Drain washer fluid reservoir for windshield washer system (2)

3

Unclip pump for windshield washer system (M5/1) from washer fluid reservoir (2) and pull out seal

Do not mix up hoses (3) on pump for windshield washer system (M5/1).

Installation: Ensure that seal is correctly seated between pump for windshield washer system (M5/1) and washer fluid reservoir for windshield washer system (2), check seal, replace if necessary.

Mounting wedge

*110589035900

4

Install in the reverse order

Remove/install windshield washer system pump

110 589 03 59 00

Mounting wedge

Referenced documents