Shown on MODEL 453.3 |
1 | Washer fluid reservoir |
2 | Screw |
M5/1 | Windshield washer system pump |
P82.35-2764-06
| Remove/install | ||
1 | Open maintenance flap | ||
2 | Remove screw/bolt (2) | ||
3 | Remove washer fluid reservoir (1) upwards, until the pump for the windshield washer system (M5/1) is accessible | Installation: Ensure that washer fluid reservoir (1) is correctly seated in guide. | |
4 | Unclip washer fluid hoses from washer fluid reservoir (1) and mark | Installation: Do not mix up washer fluid hoses at front and rear. | |
5 | Detach washer fluid hoses from pump for windshield washer system (M5/1) | Collect washer fluid which flows out. | |
6 | Disconnect electrical connector from pump for windshield washer system (M5/1) | Installation: When replacing the washer fluid reservoir (1) convert the pump for the windshield washer system (M5/1). Check gasket, replace if necessary. | |
7 | Remove washer fluid reservoir (1) upwards | ||
8 | Install in the reverse order | ||
| Check | ||
9 | Windshield washer system - inspect fluid level, adjust to correct level | ||
10 | Carry out leak check on washer fluid reservoir (1) | ||
11 | Perform function check of windshield washer system |