ar8235p6000fr

Remove/install washer fluid reservoir of windshield washer system

Type ar · topic 82.35 · version 0101 · 2018-08-16

Applies to: Model 257, 290

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 257 · Series 290

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.41 Pump/container/heat exchanger — Series 257 · Series 290

AR82.35-P-6000FR

Remove/install washer fluid reservoir of windshield washer system

02.08.2018

Model

257, 290

Remove/install washer fluid reservoir of windshield washer system

P82.35-2755-09

Shown on model 257 with code 875 (Heated windshield washer system)

1

Washer fluid reservoir

5

Filler neck

2

Nut

6

Heat exchanger

3

Electrical connector

M5/1

Windshield washer system pump

4

Guide

Danger

Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin.

Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children.

AS82.35-Z-0001-01A

Remove/install

1

Remove left front wheel and tire assembly.

AR40.10-P-1102A

2

Remove rear section of front left fender liner.

AR88.10-P-1301FR

3

Unbolt nut (2).

4

Remove windshield washer system pump (M5/1) and place to one side with connected lines.

Collect escaping washer fluid in a suitable vessel.

5

Disconnect electrical connector (3).

6

Take washer fluid reservoir (1) upward out of guide (4).

7

Detach washer fluid reservoir (1) from filler neck (5).

Installation:
Ensure that filler neck (5) is seated correctly at washer fluid reservoir (1).
Leaks can occur otherwise.

8

Remove heat exchanger (6).


Model 257, 290
with code 875 (Heated windscreen washer system)

AR82.35-P-6006FR

Do not disconnect refrigerant hoses.

9

Remove washer fluid reservoir (1).

10

Install in the reverse order.

11

Correct fluid level of windshield washer system.

AP82.35-P-8210C

Check

12

Carry out function check of windshield washer system.

AP82.35-P-8252D

Referenced documents