ar8235b6000d

Remove/install washer fluid reservoir of windshield washer system

Type ar · topic 82.35 · version 0100 · 2016-02-12

Applies to: Body 693.8 with Vehicle 693

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 693

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.41 Pump/container/heat exchanger — Series 693

AR82.35-B-6000D

Remove/install washer fluid reservoir of windshield washer system

12.02.16

Body 693.8 with Vehicle 693

Remove/install washer fluid reservoir of windshield washer system

B82.35-0013-09

1 Bolts

2 Pump electric connection

3 Flexible tubes to the injectors

Remove and install

1

Open the maintenance cover.

Danger!

Risk of injury due to being caught or smashed by the tilting cabin

Do not go into the area where the cabin tilts when it is tilted forward and returned to its normal position, taking the necessary precautions to avoid non-authorized persons to go into this area. Tilt the cabin always up to its final position.

AS60.80-B-0001-01A

2

Tilt the cabin forward.

AR60.80-B-0010C

3

Remove the plug and drain the water as much as possible. Install the plug again.

Put an appropriate recipient under the filling mouth.

4

Disconnect the electric connection (2) from the pump.

5

Disconnect the flexible tubes (3) from the pump.

6

Loose the bolts (1) of the windshield washer liquid reservoir.

7

Remove the windshield washer liquid reservoir pulling it up from its support.

Collect the removed water, if possible in an appropriate recipient.

8

Install in the reverse order.

Referenced documents