1 | Bolts |
E1 | Left front lamp unit |
E2 | Right front lamp unit |
E1n4 | Left xenon light power supply module |
E2n4 | Right xenon light power supply module |
P82.10-7076-01
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds. | Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Carry out initial startup of left xenon light power supply module (E1n4) or right xenon light power supply module (E2n4) | Only when replacing left xenon light power supply module (E1n4) or right xenon light power supply module (E2n4). | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
2 | Remove left front lamp unit (E1) or right front lamp unit (E2) | ||
3 | Remove bolt (1) | ||
4 | Remove left xenon light power supply module (E1n4) or right xenon light power supply module (En2n4) from left front lamp unit (E1) or right front lamp unit (E2) until electrical connector is accessible | Installation: Ensure gasket is correctly installed. | |
5 | Disconnect electrical connector from left xenon light power supply module (E1n4) or right xenon light power supply module (E2n4) | ||
6 | Install in the reverse order |
Referenced documents
- ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
- ad0000p200004a
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar8210p4730rk Remove/install lamp unit
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)
- as8210z000101a Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon