Remove/install Keyless Go control unit

AR80.35-P-0001RT

Remove/install Keyless Go control unit

01.10.2019

Model

251

up to model year 2011

with code 889 (KEYLESS-GO)

Shown on vehicle with spare tire on steel rim, code 669

1

Load compartment floor

4

Connector

2

Spare wheel

N69/5

KEYLESS-GO control unit

3

Nuts

Shown on vehicle with spare tire on steel rim, code 669

20

Handle

24

Plastic insert

22

Vehicle jack

25

Mounting screw

23

Retaining strap

Shown on vehicle without spare tire on steel rim, code 669

20

Handle

26

Vehicle tool kit shaped part

25

Mounting screw

 

Remove/install

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Open liftgate

2

Remove luggage compartment cover

With CODE 723 (EASY-PACK load compartment cover)

3

Open load compartment floor (1) at the handle (20), fold upwards (arrow) and secure

4.1

Open retaining strap (23), take out jack (22), unscrew mounting bolt (25), lift the spare tire (2) and the plastic insert (24) under it out of the vehicle

with CODE 669 (Spare wheel on steel rim)


When lifting out trunk sill, cover with rag.
Otherwise the paint on the trunk sill and/or the steel rim can be damaged.

4.2

Remove the mounting screw (25) and lift the vehicle tool kit molded part (26) out of the vehicle

except CODE 669 (Spare wheel on steel rim)


First raise vehicle tool kit shaped part (26), then remove upward at an angle.
Otherwise the lugs can tear at bottom.

5

Unscrew nuts (3), unlock connector (4) and detach from KEYLESS-GO control unit (N69/5)

6

remove KEYLESS-GO control unit (N69/5) from the spare tire well

7

Install in the reverse order

8

Connect Star Diagnosis and perform initial startup of KEYLESS-GO control unit (N69/5)

When replacing KEYLESS-GO control unit (N695).



AD00.00-P-2000-04A