P77.33-2209-09
1 | Soft top | 4 | Locking hooks | 7 | Electric motor | ||
2 | Electrical connectors | 5 | Bolts | 8 | Screw | ||
3 | Lock linkage | 6 | Bracket |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Warning | Risk of injury when performing check and repair work in area of roll bar | Keep body parts out of the area where the roll bars extend. | |
| Remove/install | ||
1 | Remove trim from soft top (1) at front |
| |
Model 205.4, 238.4 | |||
2 | Disconnect electrical connectors (2) and expose wiring harness | ||
3 | Remove lock linkage (3) at left and right locking hooks (4) | ||
4 | Mark installation position of bolts (5) on bracket (6) and unscrew bolts (5) | Installation: Align brackets (6) according to markings. | |
5 | Remove lock linkage (3) with electric motor (7) | ||
6 | Unscrew bolt (8) | ||
7 | Mark installation position of lock linkage (3) on bracket (6) | ||
8 | Remove lock linkage (3) from electric motor (7) and electric motor (7) from bracket (6) | Installation: Align lock linkage (3) with markings. | |
9 | Install in the reverse order |
Referenced documents
- ar6830p4320lca Removing and installing soft top paneling
- ar6830p4320lwr Removing and installing soft top paneling
- as0000z000901a Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.
- as9100z000301lca Risk of injury when performing check and repair work in area of roll bar