ar7710s2000a

Removing and installing gasket on manual pop-up roof

Type ar · topic 77.10 · version 0101 · 1997-10-07

Applies to: MODEL 638 with CODE (D23) Glass pop-up roof in passenger compartment with CODE (D28) Glass pop-up roof in driver's compartment

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.10 Manual sliding roof — Series 638

EinPAS 38 Roof system › 38.15 Sliding roof/panoramic sliding sunroof › 38.15.33 Paneling/sliding roof panel — Series 638

AR77.10-S-2000A

Removing and installing gasket on manual pop-up roof

12.9.96

MODEL 638
with CODE (D23) Glass pop-up roof in passenger compartment
with CODE (D28) Glass pop-up roof in driver's compartment

Removal

1

Detach wind deflector

Do not screw out screw completely

AR77.20-S-2500A

2

Remove gasket

Installation

3

Position gasket joint in center area. Press gasket in from inside toward outside.

Pull gasket slightly in area of corners.

Gasket should not kink or dip in area of radius

4

Roll or press in gasket

5

Tighten wind deflector

Check for leakage

AR77.20-S-2500A

Referenced documents