ar7240m3000m

Remove/install door control valve

Type ar · topic 72.40 · version 0100 · 2007-01-22

Applies to: MODEL 670.373 /374 Medio with outside swiveling door, single-wing, door width 800 mm

Where it sits

Function group 3 Body › 72 Doors › 72.40 Door control — Series 670 (models 373, 374)

EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.30 Door drive system/door control — Series 670 (models 373, 374)

AR72.40-M-3000M

Remove/install door control valve

12.12.06

MODEL 670.373 /374
Medio with outside swiveling door, single-wing, door width 800 mm

Remove/install door control valve

M72.25-0035-05

1 Door control valve

2 Bracket

3 Compressed air line (opening)

4 Compressed air line (closing)

5 Check valve, pressure safety

Removing

1

Turn outer emergency lever in direction of arrow to stop.

2

Drain electrical accessories circuit

3

Open front flap

4

Remove cable tie (arrows) from door control valve (1)

5

Mark electrical lines in relation to connectors and remove from door control valve (1).

6

Mark compressed air lines (3, 4) with number of compressed air hose and remove from door control valve (1).

7

Remove check valve pressure safety (5) from door control valve (1).

8

Remove mount (2) with door control valve (1) from stationary heater unit.

9

Remove mount (2) from door control valve (1).S

Only if door control unit is replaced.

Install

10

Install bracket (2) in new door control valve (1).

Only if door control unit was replaced.

11

Install door control valve (1) with bracket (2) on stationary heater unit.

12

Install compressed air lines (3, 4) and check valve pressure safety (5) on door control valve (1).

Use new sealing rings.

13

Connect electrical lines to door control valve (1) and attach wiring harness with cable ties.

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

14

Start engine and fill compressed-air system up to the cutoff pressure

15

Turn off engine

16

Turn outer emergency lever to basic position

17

Check door operation

AR72.25-M-1530M

18

Check emergency unlocking

AR72.25-M-1600M

Referenced documents