Shown on model 909.8 |
1 | Bottom carriage |
2 | Guide rail bottom |
3 | Bracket |
4 | Bolts |
5 | Bolts |
D72.16-1343-04
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove/install | ||
1 | Remove lower guide rail (2) |
| |
Model 909.8 | |||
2 | Mark position of lower sliding carriage (1) on bracket (3) | ||
3 | Unscrew bolts (4) and remove lower sliding carriage (1) from bracket (3) | Installation: Tighten bolts (4) after adjusting lower sliding carriage (1) with specified tightening torque. | |
4 | Mark position of bracket (3) on sliding door | ||
5 | Unscrew bolts (5) and remove bracket (3) from sliding door | Screw/bolt, lower carriage to sliding door | |
6 | Install in the reverse order | ||
7 | Adjust lower sliding carriage (1) | ||
Adjustment screw for lower/upper carriage | |||
Screw/bolt, lower carriage to sliding door |
Referenced documents
- ar7216d102302f Adjust evenness, installation depth and stop of sliding door
- ar7216d7816f Remove/install bottom guide rail for sliding door
- ar7216d7816fa Remove/install bottom guide rail for sliding door
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.