AR72.16-D-2210E | Disassemble/assemble sliding door | 15.4.03 |
MODEL 903.612 with CODE (PG5) UPS integral box body
D72.16-1200-09
1 Sliding door
2 Inner actuation
3 Door catch
4 Door paneling
5 Door lock
11 Pilot bushing
12 Retaining bolt
13 Retaining bracket
14 Sealing frame
15 Dirt trap
6 CL element
7 Outer door handle
8 Bracket
9 Grab handle
10 Stop buffer
| Remove | ||
Danger! | Risk of injury to fingers being jammed or squeezed when removing and installing or aligning hoods, doors, trunk lid/tailgate or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Remove sliding door (1) | Lay sliding door (1) down on suitable surface with aid of helper | |
| Disassemble/assemble | ||
2 | Remove door lock (5). | ||
3 | Remove bracket (8) | Hand riveter | |
Drill (electric/pneumatic) | |||
4 | Remove handle (9) | ||
5 | Remove stop buffer (10) | ||
6 | Remove pilot bushings (11) | ||
7 | Remove retaining bolts (12) | ||
8 | Remove sealing frame (14) | ||
9 | Remove dirt trap (15) | ||
10 | Assemble in reverse order | ||
| Install | ||
11 | Install sliding door (1) |
Commercially available tools
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
Referenced documents
- ar7216d1260e Remove/install sliding door
- ar7216d4035e Remove/install sliding door lock
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.