Assemble/disassemble door lining in rear door

AR72.12-P-1040RT

Assemble/disassemble door lining in rear door

23.2.05

 

Disassemble/assemble

1

Switch off ignition and remove the transmitter key from the EIS [EZS] control unit

 On vehicles with Keyless Go, code 889: Press keyless go start/stop button repeatedly until ignition is switched off Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).

2

Remove rear door lining (1)

 Lay door lining front side down on suitable subsurface to prevent damage!

AR72.12-P-1010RT

3

Remove trim strip (2)

AR72.12-P-1050RT

4

Unclip left rear door tweeter (H4/35) or right rear door tweeter (H4/36) from handle shell (arrows) and remove

 Assembly: Installation position for tweeter is determined by guide lug (8)

5

Remove inside door opener (3)

AR72.12-P-2310RT

6

Remove left rear power window switch (S21/3) or right rear power window switch (S21/4)

AR72.29-P-0002RT

7

Remove armrest (4)

AR72.12-P-1020RT

8

Unclip left rear door entrance/exit lamp (E17/5) or right door entrance/exit lamp (E17/6) and disconnect electrical connector (10)

9

Remove ribbon cable (7) from bracket (6)

 Treat ribbon cable carefully to prevent damage.

10

Remove door pocket (5)

AR72.12-P-1021RT

11

Assemble in reverse order