P72.29-2369-06
1 Rear door lining
2 Sound deadening mat
3 Electrical connector
4 Bolt
5 Clip
S21/3 Left rear power window switch
S21/4 Right rear power window switch
| Remove/Install | ||
1 | Remove rear door lining (1) | Lay door lining front side down on suitable subsurface to prevent damage! | |
2 | Remove sound deadening mat (2) in area or left rear power window switch (S21/3) or right rear power window switch (S21/4) from door lining | Loosen sound deadening mat carefully to prevent damage | |
Installation: Position gluing points (e.g. with hot air gun) and fasten sound deadening mat to door lining. | |||
3 | Separate electrical connection (3) | Treat ribbon cables carefully to prevent damage | |
The locks of the electrical connector are located on the left | |||
4 | Unscrew bolt (4) | Installation: Do not tighten bolt (4) too tightly | |
5 | Unlock clip (5) and remove left rear power window switch (S21/3) or right rear power window switch (S21/4) | Installation: Ensure that clip (5) is seated correctly. | |
6 | Install in the reverse order |
Referenced documents
- ar7212p1010rt Remove/install rear door lining