ar7210p2420rt

Remove/install front door inside door opener

Type ar · topic 72.10 · version 0100 · 2005-05-17

Applies to: MODEL 251

Where it sits

Function group 3 Body › 72 Doors › 72.10 Front door — Series 251

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.32 Lock/actuation — Series 251

AR72.10-P-2420RT

Remove/install front door inside door opener

27.1.05

MODEL 251

Remove/install front door inside door opener

P72.10-3159-07

Shown on vehicle with interior lights package, code 876:

1 Front door lining

2 Trim strip

3 Inside door opener

4 Electrical connector

5 handle recess illumination

6 Bolt

7 Bracket

S85/5 Left interior CL switch

Remove/Install

1

Remove front door lining (1)

Lay door lining front side down on suitable subsurface to prevent damage!

AR72.10-P-1000RT

2

Remove trim strip (2)

AR72.10-P-1050RT

3

Unscrew bolt (6)

4.1

Unclip handle recess illumination (5)

Only on vehicles with interior lights package, code 876.

5

Disconnect electrical connector (4) from left inner actuation CL switch (S85/5) and remove left inner actuation CL switch (S85/5)

6

Remove ribbon cable from bracket (7)

Treat ribbon cable carefully to prevent damage

7

Raise front door lining (1) and unclip handle recess toward front

5 clips (arrows).

8

Remove inside door opener (3) toward rear from front door lining (1)

9

Install in the reverse order

Referenced documents