L72.15-0009-06
Illustrated on model 667.35
1 Front door
2 Screw
3 Lower door hinge
4 Upper door hinge
D72.10-1120-02
1 Front door
5 Door trim
6 Wiring harness (with code (FZ0) Central locking with master key or code (FZ1) Central locking with radio remote control)
7 Wiring harness (with code (FS9) Driver-side electrically adjustable mirror or code (FE5) Driver and passenger door power window or code (F62) Heated rearview mirror)
8 Passages (on vehicles with door wiring harness)
D72.10-1121-02
| Remove/install | ||
1 | Remove door trim (5) | Only when door wiring harness is installed. | |
2 | Disconnect passage (8) and expose door wiring harness installed | Only when door wiring harness is installed. | |
3 | Unscrew bolts (2) on upper door hinge (4) and lower door hinge (3) | Aid of helper required. | |
Before removing front door (1), mark installation position of upper door hinge (4) and lower door hinge (3) from A-pillar. | |||
| |||
4 | Remove front door (1). | Aid of helper required. | |
5 | Disassemble front door (1) | If required. | |
6 | Install in the reverse order | ||
7 | Adjust front door |
Hinged doors
Referenced documents
- ar7210d0510a Disassemble/assemble front door
- ar7210d0550a Adjusting front door